Have problem trying to insert a small working platform on a longer ledger? We have a easy solution for you.

The 0.6m hopup has a U-Head top and a coupler bottom. Insert it between the two ledgers to create a small work deck on your scaffold. Save time, save money.

The post Galvanized Hopup Posts appeared first on Victoria Scaffolding.

Step 1

Place 4 base jacks on the ground with a certain distance. Base jacks should be extended no more than 600mm.

Step 2

Fit the Frames on the jacks, level the frames & connect the braces. Lock all the safety pins after connecting the braces.

Step 3

Fit U-head jacks on top of the frames, eccentricity all parallel to frames. U-head jacks extend no more than 600mm.

Step 4

Place beam in the U-head such that load is balanced over frame leg. Lap beams in U-head or turns U-head to ensure single beam is centrally located.

Do not apply eccentric loading on the U-head. Do not offset the beam. Prior to concrete pour-An engineer must check that formwork and concrete loads will not exceed H-frame capacity (WLL), and visually inspect and sign off on the correct erection of H-frame and formwork. When adjusting the height of the U-head, only hit the handle, do not hit on the collar nut.

Nut adjustment must be less than 600mm.

Warning: Do not use bend or damaged frames.

Warning:

Do not use broken or damage brace.

Only use the correct size braces to fit in the frames. Check the nut is tight before using.

When adjusting the height of the U-head, only hit the handle and do not hit on the collar nut.
Nut adjustment must be less than 600mm.

The post H-frames Formwork Shoring System Safety Guide appeared first on Victoria Scaffolding.

Our mobile scaffolds are easy to install and dismantle.  Simply follow the steps below and you will have your mobile scaffold tower installed in 10 – 15 minutes.

Step1. Fit the caster wheels to the ladder frame. Ensure that the caster brake is on before building up the mobile scaffold. Fasten the wheels with the pin.

Step2: Attach the bottom brace with black hook across sides.

Step3: Attach two pieces of the horizontal braces (gold hook) to the first row of ladder frame. Now it is self-supporting.

Step4: Attach two pieces of diagonal braces (green hook) to the second and fourth row of the ladder frame.

Step5: Hinge the stabilizer to the vertical tube of the ladder frame. Lock the chamber.

Step6: Attach the platform to the top of the frame.

Step7: Fit the extension frames on the top of the ladder frame.

Step8: Attach another 2 pieces of diagonal braces on the extension frames.

Step9: Fit the second platform to the top of the extension frames.

Step10: Fit the guard rail frame on the top of the extension frames.

Step11: Attach 4 pieces (2 on the side) of horizontal braces to the guardrail.

Step12: Fit the toe board to 4 sides of the platform.

The post Aluminium Mobile Scaffold Tower Installation Guide appeared first on Victoria Scaffolding.

The post New Product Available Now_ Wind Resist Plank Clip appeared first on Victoria Scaffolding.

3bd-hop-up-with-spigot-scafeast

The post Three board hop up with spigot appeared first on Victoria Scaffolding.

With your support for the last decades, We Victoria Scaffolding proundly open a new yard in Maidston,

Addree: 50-60 Emu Road, Maidston 3012

Contact: 03 9317 3867

We would offering best service supplying:

Kiwk Stage scaffold

Formwork shoring & LVL

Aluminium Scaffold Tower

Temporary Fencing

We offering special discount pick up in Maidstone yard this month

The post Maidstone Warehouse Opening appeared first on Victoria Scaffolding.

EZY Fence Panel $34+gst

Concrete Feet $15+gst

Clamp $3+gst

Bracket Support  $17+gst

Please Ring 03 9793 6351

Inspection & pick up available @

Dandenong: 181-183 Frankston Dandenong Rd, Dandenong Sth 3175

Maidstone: 50-60 Emu Rd, Maidstone 3012

scafeast scaffold

The post Temporary Fencing For Sale appeared first on Victoria Scaffolding.